Polaris P28 Pressure Side Pool Cleaner includes 3 extra tail scrubbers to sweep and scrub the bottom and walls of your in ground swimming pool. Requires a dedicated booster pump.

Pressure side automatic cleaner for in ground pools
Sweeps and scrubs the bottom and walls of any pool
Powered by double venturi jets, cleans a pool faster (3 hours or less)
Able to traverse any in ground pool shape and size
Works on all pool surface types
Includes 31 feet of hose with hose floats and swivels
All-purpose zipper filter bag to capture debris such as dirt and leaves
Easily connects to a dedicated pressure line
Requires a booster pump for operation (sold separately)

The Polaris Vac-Sweep P28 Pressure-Side Automatic Pool Cleaner includes 3 extra TailSweep Hose Scrubbers designed to gently sweep, scrub, and agitate the debris on the bottom of the pool. With its double venturi jet design and attached tail sweep scrubber, helps ensure the pool is thoroughly cleaned in approximately 3 hours or less. The Polaris P28 is easy to install, connecting to a dedicated pressure line and requires a separate booster pump for operation which is sold separately. With the Polaris P28 Pressure Pool Cleaner, you will get greater vacuum power and faster cleaning, covering the bottom and walls, capturing small to medium-sized debris in its single chamber filter bag.

Included with the Polaris P28

The Polaris P28 Pressure Automatic Pool Cleaner comes complete with 31 feet of hose including the hose floats and swivels, sweep hose with 3 extra tail scrubbers, back-up valve, in-line filter assembly, quick disconnect with universal wall fitting (UWF) and an all-purpose zippered bag. For the Polaris P28 cleaner to run, it requires a booster pump which is sold separately.

Polaris P28 Features

The two venturi jets on the Polaris P28 allow the cleaner to easily maneuver around the pool floor and walls for a swift and effective clean. The iconic 3-wheel design provides the cleaner with the ability to effortlessly navigate around obstacles and covering all angles of the pool. The Polaris P28 provides longer filter cycles with its all-purpose filter bag capturing small to medium-sized debris such as pebbles, acorns, and leaves. Debris is captured before it reaches the pump basket or pool filter, helping prolong the life of the pool’s filtration system.

Sweeps, Scrubs, Vacuums Pool Walls & Bottom

The Polaris P28 collects, traps, and stirs up debris from the floor and walls in the pool. The Polaris P28 Pressure Pool Cleaner connects to the dedicated pressure line from the side of the pool, requiring a booster pump for operation. The Polaris P28 uses a narrow turbine, shaft drive mechanism, and idler wheel to provide forward drive to the cleaner’s wheels. The cleaner goes into back-up mode every 3 minutes, pulling the Polaris P28 away from obstacles increasing its randomized cleaning pattern. The sweep hose with tail scrubber helps to loosen dirt in difficult, hard to reach areas, leaving you with a complete clean.

Most Trusted Brand in Pressure-Side Pool Cleaning

The Polaris P28 is the most popular automatic pressure side pool cleaner on the market today. Providing top of the line cleaning and efficiency, reliably keeping pools dirt and debris-free for a cleaner swimming experience.

Common Questions:

Polaris P28 does not climb and or goes in circles

Please verify the wheel RPM’s are in the correct range and adjust the thrust jet. If the cleaner is not climbing well, then ensure the thrust jet is in the 11 o’clock position. If the cleaner is going in circles, then angle the thrust jet so it is pointing opposite of the way the cleaner is turning. For example, if the cleaner is turning to the right, then point the thrust jet to the left.

Polaris P28 does not clean the entire pool

Verify that the feed hose reaches within 6 inches of the farthest point of the pool. If not, order a new hose section.
Check the thrust jet for the straight back position that optimizes random turning.
While the cleaner is operating, hold it upside down and look into the vacuum tube. There should be two distinct, even jets of water. If there are not, contact Polaris customer service for assistance.

How long is the hose that comes with the Polaris P28 Pressure Pool Cleaner?

The Polaris P28 comes with a 31′ feed hose. All hose floats and swivels are included.

Can the feed hose be extended?

Yes, the hose can be extended with a section of hose, swivel, and two hose nuts.

Can the hose be trimmed shorter?

Yes, the hose can be trimmed shorter by simply cutting the amount of overage equally out all three 10′ sections.

What filter bags can be used with this cleaner?

Polaris K13 All-Purpose Zippered Bag for P28
Polaris K16 280/P28 Pool Cleaner All-Purpose Velcro Filter Bag
Polaris K14 Pool Cleaner Sand/Silt Velcro Bag
Polaris K15 280/P28 Pool Cleaner Velcro Leaf Bag

Product Type:	Pool Cleaner
Pool Cleaner Type:	Pressure Side
Manufacturer:	Polaris
Cord/Hose Length:	31 ft
Cleaning Area:	Floor, Walls, and Steps
Pool Surface:	All Surfaces
Booster Pump:	Sold Separately
Installation Type:	Residential
Pool Type:	In Ground
Cleaning Cycle:	3 hours
Product Dimensions:	23″ Width x 23″ Length x 10″ Height
Product Weight:	19 lbs.